video
Medium Helium Bottle of 20-30 Balloons of 22 cm

Medium Helium Bottle of 20-30 Balloons of 22 cm

€37.00

If you want to fill the helium balloons yourself, take advantage and buy this disposable helium bottle. Large size disposable helium bottle, with a capacity of 0.25 cubic meters. With it you can inflate approximately 20-30 22cm balloons, or 12 28cm balloons, or 12 45cm mylar balloons.

For latex balloons the duration is approximately between 4 to 7 hours and for foil balloons more than 24 hours. With this large bottle you can inflate both latex and foil balloons quickly, easily and safely.

Balloons and ribbon are not included.

Helium-inflated balloons will float for approximately the time indicated in the following table, but the duration of balloons in good condition may vary depending on humidity, heat, light sources ...

We advise that, if you are going to inflate latex balloons, you do so at least 3 hours before the event.

The bottle is made of steel and is disposable. To recycle it, you can take it to your nearest recycling point. Before, check that there is no gas left inside by flexing the nozzle.

Instructions for use:

- Turn the green handle to the left to open the valve.

- Slide the neck of the balloon into the black nozzle.

- Hold the neck of the ball firmly between your thumb and index finger at the widest part of the mouthpiece.

- Press the nozzle down gently to inflate. The bottle has a flexible rubber nozzle that releases the gas when flexed, cutting off the supply when released.

- Fill the balloon to the desired size.

- Release thumb pressure on the nozzle to stop inflation.

- After inflating latex balloons, remove them from the nozzle and tie them.

- Place the ribbon of the desired length under the knot of the latex balloons or the bottom area of ​​the mylar balloons.

Once finished inflating the balloons, if there is still gas left, close the tap to make sure that it does not leak so we can use it at our next party.



Leer más

Description

If you want to fill the helium balloons yourself, take advantage and buy this disposable helium bottle. Large size disposable helium bottle, with a capacity of 0.25 cubic meters. With it you can inflate approximately 20-30 22cm balloons, or 12 28cm balloons, or 12 45cm mylar balloons.

For latex balloons the duration is approximately between 4 to 7 hours and for foil balloons more than 24 hours. With this large bottle you can inflate both latex and foil balloons quickly, easily and safely.

Balloons and ribbon are not included.

Helium-inflated balloons will float for approximately the time indicated in the following table, but the duration of balloons in good condition may vary depending on humidity, heat, light sources ...

We advise that, if you are going to inflate latex balloons, you do so at least 3 hours before the event.

The bottle is made of steel and is disposable. To recycle it, you can take it to your nearest recycling point. Before, check that there is no gas left inside by flexing the nozzle.

Instructions for use:

- Turn the green handle to the left to open the valve.

- Slide the neck of the balloon into the black nozzle.

- Hold the neck of the ball firmly between your thumb and index finger at the widest part of the mouthpiece.

- Press the nozzle down gently to inflate. The bottle has a flexible rubber nozzle that releases the gas when flexed, cutting off the supply when released.

- Fill the balloon to the desired size.

- Release thumb pressure on the nozzle to stop inflation.

- After inflating latex balloons, remove them from the nozzle and tie them.

- Place the ribbon of the desired length under the knot of the latex balloons or the bottom area of ​​the mylar balloons.

Once finished inflating the balloons, if there is still gas left, close the tap to make sure that it does not leak so we can use it at our next party.



close

Wishlist